NEO-M8N GPS module
Faster and more accurate GPS that also uses GLONASS, Galileo and BeiDou.
MeasuresPosition, time, speed
AccuracyAbout 2 m
InterfaceUART and I2C
Supply voltage3.3 to 5 V module
SensorsReviewedMPN NEO-M8NUsed in 1 project
In short
What is the NEO-M8N GPS module and what is it used for?
Faster and more accurate GPS that also uses GLONASS, Galileo and BeiDou. Makers use it for drones and rovers.
How it works
A u-blox receiver tracking GPS, GLONASS, Galileo and BeiDou satellites at once.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Position, time, speed |
| Accuracy | About 2 m |
| Interface | UART and I2C |
| Supply voltage | 3.3 to 5 V module |
Pinout
VCC3.3 to 5 V on modules
GNDGround
TXUART out
RXUART in
SDA and SCLI2C (on some boards)
PPSPulse per second
How to use it
Parse NMEA with TinyGPSPlus, or use u-blox UBX messages for faster updates. Drone boards often add a compass on the same cable.
Applications
Drones and rovers
Builds that use it
Alternatives
- GPS module NEO-6MCheaper, GPS only
Common questions
What is the NEO-M8N GPS module used for?
In maker projects: drones and rovers.
How does the NEO-M8N GPS module work?
A u-blox receiver tracking GPS, GLONASS, Galileo and BeiDou satellites at once.
What voltage does the NEO-M8N GPS module need?
3.3 to 5 V module.
How do I connect the NEO-M8N GPS module to an Arduino or ESP32?
UART and I2C. Pins: VCC (3.3 to 5 V on modules), GND (Ground), TX (UART out), RX (UART in), SDA and SCL (I2C (on some boards)), PPS (Pulse per second).
What can I use instead of the NEO-M8N GPS module?
GPS module NEO-6M.
