MCP1700 LDO 3.3 V
Very low quiescent current LDO for battery nodes.
FunctionLDO regulator
Input voltage2.3 to 6 V
Output voltage3.3 V
Output current250 mA
PowerReviewedMPN MCP1700-3302EUsed in 1 project
In short
What is the MCP1700 LDO 3.3 V and what is it used for?
Very low quiescent current LDO for battery nodes. Makers use it for battery sensor nodes.
How it works
A low-dropout regulator drawing about 1.6 µA.
Key specifications
| Power module spec | Value |
|---|---|
| Function | LDO regulator |
| Input voltage | 2.3 to 6 V |
| Output voltage | 3.3 V |
| Output current | 250 mA |
| Efficiency or dropout | About 1.6 µA quiescent, 178 mV dropout |
Pinout
TO-921 GND, 2 VIN, 3 VOUT
SOT-231 GND, 2 VOUT, 3 VIN
How to use it
Use 1 µF ceramic capacitors on input and output. Its maximum input is 6 V, so it suits a single Li-ion cell, not 9 V or 12 V.
Applications
Battery sensor nodes
Builds that use it
Alternatives
- HT7333 low quiescent LDOHigher input voltage
Common questions
What is the MCP1700 LDO 3.3 V used for?
In maker projects: battery sensor nodes.
How does the MCP1700 LDO 3.3 V work?
A low-dropout regulator drawing about 1.6 µA.
What voltage does the MCP1700 LDO 3.3 V need?
2.3 to 6 V.
What can I use instead of the MCP1700 LDO 3.3 V?
HT7333 low quiescent LDO.
