M5Stack Core2
ESP32 in a case with a touch screen, battery, IMU and speaker.
MicrocontrollerESP32-D0WDQ6-V3 240 MHz
Flash16 MB
RAM8 MB PSRAM
WirelessWi-Fi, Bluetooth
Development BoardsReviewedMPN K010Used in 1 project
In short
What is the M5Stack Core2 and what is it used for?
ESP32 in a case with a touch screen, battery, IMU and speaker. Makers use it for quick IoT gadgets.
How it works
An ESP32 with 8 MB PSRAM, a 2 inch capacitive touch screen, MPU6886 IMU, RTC, vibration motor and 390 mAh battery in a case.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32-D0WDQ6-V3 240 MHz |
| Flash | 16 MB |
| RAM | 8 MB PSRAM |
| Wireless | Wi-Fi, Bluetooth |
| Built-in display | 2 inch 320 × 240 touch |
Pinout
Port A (red)Grove I2C on G32 G33
M-BusStacking bus
SDmicroSD slot
USB-CPower and programming
How to use it
Use the M5Unified and M5GFX libraries in Arduino, or UIFlow. The AXP192 power chip controls the screen and peripherals, so call M5.begin() before anything else.
Applications
Quick IoT gadgets
Builds that use it
Alternatives
- M5Stack ATOM LiteTiny M5 controller
- ESP32-S3-BOX-3Voice-focused S3 box
Common questions
What is the M5Stack Core2 used for?
In maker projects: quick IoT gadgets.
How does the M5Stack Core2 work?
An ESP32 with 8 MB PSRAM, a 2 inch capacitive touch screen, MPU6886 IMU, RTC, vibration motor and 390 mAh battery in a case.
What can I use instead of the M5Stack Core2?
M5Stack ATOM Lite and ESP32-S3-BOX-3.
