ICM-20948 9-axis IMU
Low-power 9-axis IMU, the replacement for the MPU9250.
MeasuresAcceleration, rotation, magnetic field
InterfaceI2C or SPI
I2C address0x68 or 0x69
Supply voltage1.71 to 3.6 V
SensorsReviewedMPN ICM-20948Used in 2 projects
In short
What is the ICM-20948 9-axis IMU and what is it used for?
Low-power 9-axis IMU, the replacement for the MPU9250. Makers use it for wearables, orientation.
How it works
A 6-axis MEMS IMU plus an AK09916 magnetometer in one package.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Acceleration, rotation, magnetic field |
| Interface | I2C or SPI |
| I2C address | 0x68 or 0x69 |
| Supply voltage | 1.71 to 3.6 V |
Pinout
VIN3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
AD0Address 0x68 or 0x69
INTInterrupt
NCSSPI chip select
How to use it
Use the SparkFun ICM-20948 library. Calibrate the magnetometer away from steel and motors. Its DMP can run fusion on the chip with extra firmware.
Applications
Wearablesorientation
Builds that use it
Alternatives
- BNO055 absolute orientation sensorSimpler fused output
- MPU9250 9-axis IMUOlder part it replaces
Common questions
What is the ICM-20948 9-axis IMU used for?
In maker projects: wearables, orientation.
How does the ICM-20948 9-axis IMU work?
A 6-axis MEMS IMU plus an AK09916 magnetometer in one package.
What voltage does the ICM-20948 9-axis IMU need?
1.71 to 3.6 V.
How do I connect the ICM-20948 9-axis IMU to an Arduino or ESP32?
I2C or SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), AD0 (Address 0x68 or 0x69), INT (Interrupt).
What can I use instead of the ICM-20948 9-axis IMU?
BNO055 absolute orientation sensor and MPU9250 9-axis IMU.
