Hub motor 250 W (e-bike)
Brushless motor inside a wheel for e-bikes and carts.
TypeBLDC hub motor with Hall sensors
Supply voltage24 or 36 V
CurrentUp to about 10 to 15 A
ControlBLDC controller
Motors & ActuatorsReviewedMPN 24V 250W hubUsed in 1 project
In short
What is the Hub motor 250 W (e-bike) and what is it used for?
Brushless motor inside a wheel for e-bikes and carts. Makers use it for e-bike and EV projects.
How it works
A brushless motor built into the wheel hub, with Hall sensors for rotor position.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | BLDC hub motor with Hall sensors |
| Supply voltage | 24 or 36 V |
| Current | Up to about 10 to 15 A |
| Control | BLDC controller |
Pinout
Three thick phase wiresTo the controller
Five Hall wires5 V, GND, H1 H2 H3
How to use it
Use a BLDC controller matched to the motor voltage and power. Match the phase and Hall wire order, trying combinations if the colours do not match.
Applications
E-bike and EV projects
Builds that use it
Alternatives
- BLDC motor controller 24/36 VMatching controller
Common questions
What is the Hub motor 250 W (e-bike) used for?
In maker projects: e-bike and EV projects.
How does the Hub motor 250 W (e-bike) work?
A brushless motor built into the wheel hub, with Hall sensors for rotor position.
What voltage does the Hub motor 250 W (e-bike) need?
24 or 36 V.
What can I use instead of the Hub motor 250 W (e-bike)?
BLDC motor controller 24/36 V.
