GPS active antenna (external)
Active GPS antenna with a magnetic base for better reception.
MeasuresGPS L1 1575 MHz signal
InterfaceSMA or u.FL connector
Supply voltage3 to 5 V from the receiver
SensorsReviewedMPN GPS active antennaUsed in 1 project
In short
What is the GPS active antenna (external) and what is it used for?
Active GPS antenna with a magnetic base for better reception. Makers use it for vehicle trackers.
How it works
A ceramic patch antenna with a low-noise amplifier for weak satellite signals.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | GPS L1 1575 MHz signal |
| Interface | SMA or u.FL connector |
| Supply voltage | 3 to 5 V from the receiver |
Pinout
ConnectorSMA or u.FL plug, carrying the signal plus antenna power from the receiver
How to use it
Check that your GPS module supplies power on its antenna connector, and use an adapter cable if the connectors differ. Mount the antenna with a clear view of the sky.
Applications
Vehicle trackers
Builds that use it
Alternatives
- GPS module NEO-6MReceiver that the antenna connects to
Common questions
What is the GPS active antenna (external) used for?
In maker projects: vehicle trackers.
How does the GPS active antenna (external) work?
A ceramic patch antenna with a low-noise amplifier for weak satellite signals.
What voltage does the GPS active antenna (external) need?
3 to 5 V from the receiver.
How do I connect the GPS active antenna (external) to an Arduino or ESP32?
SMA or u.FL connector. Pins: Connector (SMA or u.FL plug, carrying the signal plus antenna power from the receiver).
What can I use instead of the GPS active antenna (external)?
GPS module NEO-6M.
