ESP32-WROOM-32E module
The ESP32 module on most dev boards, for your own PCB.
What is the ESP32-WROOM-32E module and what is it used for?
The ESP32 module on most dev boards, for your own PCB. Makers use it for custom PCBs with Wi-Fi.
An ESP32 chip, flash, crystal and PCB antenna in a certified, shielded module.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Wi-Fi 802.11 b/g/n, Bluetooth 4.2 and BLE |
| Band | 2.4 GHz |
| Interface | GPIO, UART, SPI, I2C |
| Supply voltage | 3.0 to 3.6 V |
| Logic level | 3.3 V |
Pinout
How to use it
For your own PCB: add a 3.3 V regulator good for 500 mA, the EN delay and a BOOT button, and keep copper and ground fill out from under the antenna. Program through TXD0 and RXD0 with a USB-serial adapter.
Applications
Builds that use it
Not used in a published project yet.
Alternatives
- ESP32-WROOM-32U (external antenna)Same with an antenna connector
- ESP32-C3-MINI-1 moduleSmaller single-core module
Common questions
What is the ESP32-WROOM-32E module used for?
In maker projects: custom PCBs with Wi-Fi.
How does the ESP32-WROOM-32E module work?
An ESP32 chip, flash, crystal and PCB antenna in a certified, shielded module.
What voltage does the ESP32-WROOM-32E module need?
3.0 to 3.6 V.
How do I connect the ESP32-WROOM-32E module to an Arduino or ESP32?
GPIO, UART, SPI, I2C. Pins: 3V3 (3.0 to 3.6 V, 500 mA), EN (Enable (10 kΩ pull-up and 1 µF to GND)), IO0 (Boot (pull-up, button to GND)), TXD0 RXD0 (Programming serial), IO6 to IO11 (Internal flash, do not use), GND (Ground pads).
What can I use instead of the ESP32-WROOM-32E module?
ESP32-WROOM-32U (external antenna) and ESP32-C3-MINI-1 module.
