ESP32-WROOM-32 DevKitC
Espressif's own ESP32 development board with the WROOM-32E module.
MicrocontrollerESP32 dual-core 240 MHz
Flash4 MB
RAM520 KB
Logic level3.3 V
Development BoardsReviewedMPN ESP32-DevKitC-32EUsed in 3 projects
In short
What is the ESP32-WROOM-32 DevKitC and what is it used for?
Espressif's own ESP32 development board with the WROOM-32E module. Makers use it for wi-Fi and Bluetooth projects.
How it works
Espressif's own ESP32 board: a WROOM-32E module, CP2102N USB-serial and a 3.3 V regulator.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32 dual-core 240 MHz |
| Flash | 4 MB |
| RAM | 520 KB |
| Logic level | 3.3 V |
| Input voltage | 5 V USB |
| ADC | 12-bit, 18 channels |
| Wireless | Wi-Fi 2.4 GHz, Bluetooth 4.2 and BLE |
| Current per I/O pin | About 20 mA recommended |
Pinout
5VUSB or external 5 V
3V33.3 V out
GPIO21 GPIO22Default I2C SDA SCL
GPIO23 19 18 5VSPI MOSI MISO SCK SS
GPIO34 to GPIO39Input only, no pull-ups
GPIO0 2 5 12 15Strapping pins (keep loads off at boot)
GPIO6 to GPIO11Flash, do not use
ENReset
How to use it
Pick ESP32 Dev Module. ADC2 pins stop working while Wi-Fi is on, so use ADC1 pins (GPIO32 to 39) for analog. If uploads stall at Connecting, hold BOOT until writing starts.
Applications
Wi-Fi and Bluetooth projects
Builds that use it
Alternatives
- ESP32 DevKit V1 30-pin (CH340)Common low-cost clone
- ESP32-S3-DevKitC-1 N16R8Newer S3 chip with PSRAM and native USB
Common questions
What is the ESP32-WROOM-32 DevKitC used for?
In maker projects: wi-Fi and Bluetooth projects.
How does the ESP32-WROOM-32 DevKitC work?
Espressif's own ESP32 board: a WROOM-32E module, CP2102N USB-serial and a 3.3 V regulator.
What can I use instead of the ESP32-WROOM-32 DevKitC?
ESP32 DevKit V1 30-pin (CH340) and ESP32-S3-DevKitC-1 N16R8.
