ESP32
Integrated Circuits · Integrated circuits

ESP32-S3 chip

ESP32-S3 SoC for very custom designs. Most people use a module instead.

Dual-core Xtensa LX7 with Wi-Fi and BLEFunction
3.3 VSupply voltage
45 GPIOInputs and outputs
240 MHzSpeed
QFN-56Package
RF layout is hard; use a WROOM module to skip certificationWatch out for
ReviewedMade by EspressifMPN ESP32-S3
Get this part
In short

What is the ESP32-S3 chip and what is it used for?

ESP32-S3 SoC for very custom designs. Most people use a module instead. Makers use it for advanced custom boards.

How it works

Dual-core Xtensa LX7 at 240 MHz with Wi-Fi, Bluetooth LE and vector instructions for AI.

Key specifications

Integrated circuit specValue
FunctionDual-core Xtensa LX7 with Wi-Fi and BLE
Supply voltage3.3 V
Inputs and outputs45 GPIO
Speed240 MHz
PackageQFN-56
Watch out forRF layout is hard; use a WROOM module to skip certification

Pinout

PowerVDD3P3, VDDA, VDD_SPI
GPIO0 to GPIO48Digital I/O with ADC, touch and matrix routing
GPIO19 and 20USB D− and D+
ENChip enable
XTAL_P and XTAL_N40 MHz crystal
LNA_INAntenna

How to use it

Using the bare chip needs RF layout, a crystal, flash and an antenna; most makers use a module or dev board. Strapping pins GPIO0, 3, 45 and 46 decide the boot mode.

Applications

Builds that use it

Not used in a published project yet.

Alternatives

Common questions

What is the ESP32-S3 chip used for?

In maker projects: advanced custom boards.

How does the ESP32-S3 chip work?

Dual-core Xtensa LX7 at 240 MHz with Wi-Fi, Bluetooth LE and vector instructions for AI.

What voltage does the ESP32-S3 chip need?

3.3 V.

What can I use instead of the ESP32-S3 chip?

ESP32-S3 DevKitC-1.