ESP32 expansion board (38-pin)
Base board with screw terminals and power for an ESP32 DevKit.
FunctionPin breakout with regulator
Supply voltage6.5 to 16 V barrel or USB
InterfaceAll ESP32 pins
Logic level3.3 V
InterfacesReviewedMPN ESP32 breakout 38PUsed in 1 project
In short
What is the ESP32 expansion board (38-pin) and what is it used for?
Base board with screw terminals and power for an ESP32 DevKit. Makers use it for neater ESP32 wiring.
How it works
A breakout board with a regulator that brings each ESP32 pin out with power and ground.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Pin breakout with regulator |
| Supply voltage | 6.5 to 16 V barrel or USB |
| Interface | All ESP32 pins |
| Logic level | 3.3 V |
Pinout
G V S rowsGround, power and signal
V jumperChoose 5 V or 3.3 V on the V row
DC jack6.5 to 16 V
Micro-USBPower
How to use it
It fits 38-pin ESP32 boards, not 30-pin ones. Set the V jumper to 3.3 V for 3.3 V sensors. Good for wiring many servos and sensors without a breadboard.
Applications
Neater ESP32 wiring
Builds that use it
Alternatives
- ESP32 DevKit V1Board to fit
Common questions
What is the ESP32 expansion board (38-pin) used for?
In maker projects: neater ESP32 wiring.
How does the ESP32 expansion board (38-pin) work?
A breakout board with a regulator that brings each ESP32 pin out with power and ground.
What voltage does the ESP32 expansion board (38-pin) need?
6.5 to 16 V barrel or USB.
How do I connect the ESP32 expansion board (38-pin) to an Arduino or ESP32?
All ESP32 pins. Pins: G V S rows (Ground, power and signal), V jumper (Choose 5 V or 3.3 V on the V row), DC jack (6.5 to 16 V), Micro-USB (Power).
What can I use instead of the ESP32 expansion board (38-pin)?
ESP32 DevKit V1.
