ESP-12F module
ESP8266 module with 4 MB flash for your own PCB.
RadioWi-Fi 802.11 b/g/n
Band2.4 GHz
Supply voltage3.0 to 3.6 V
Logic level3.3 V
WirelessReviewedMPN ESP-12FUsed in 1 project
In short
What is the ESP-12F module and what is it used for?
ESP8266 module with 4 MB flash for your own PCB. Makers use it for custom Wi-Fi boards.
How it works
An ESP8266 with 4 MB of flash and a PCB antenna.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Wi-Fi 802.11 b/g/n |
| Band | 2.4 GHz |
| Supply voltage | 3.0 to 3.6 V |
| Logic level | 3.3 V |
Pinout
VCC3.3 V
EN10 kΩ pull-up
RST10 kΩ pull-up
GPIO0Pull-up, low to flash
GPIO2Must be high at boot
GPIO1510 kΩ pull-down
TXD RXDSerial
ADC0 to 1 V
How to use it
The module needs the pull-ups and pull-down above to boot. The ADC pin takes only 0 to 1 V on the bare module. For prototyping a D1 mini or NodeMCU is much easier.
Applications
Custom Wi-Fi boards
Builds that use it
Alternatives
- Wemos D1 Mini ESP8266Ready-made board with USB
- ESP32-C3-MINI-1 moduleNewer chip with Bluetooth LE
Common questions
What is the ESP-12F module used for?
In maker projects: custom Wi-Fi boards.
How does the ESP-12F module work?
An ESP8266 with 4 MB of flash and a PCB antenna.
What voltage does the ESP-12F module need?
3.0 to 3.6 V.
What can I use instead of the ESP-12F module?
Wemos D1 Mini ESP8266 and ESP32-C3-MINI-1 module.
