CH340G USB to serial IC
USB-UART chip used on clone Arduinos.
FunctionUSB to UART
Supply voltage3.3 or 5 V
PackageSOP-16
Watch out forNeeds a 12 MHz crystal (the CH340C doesn't)
Integrated CircuitsReviewedMPN CH340GUsed in 1 project
In short
What is the CH340G USB to serial IC and what is it used for?
USB-UART chip used on clone Arduinos. Makers use it for custom USB serial boards.
How it works
A USB device that appears as a COM port and converts to UART.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | USB to UART |
| Supply voltage | 3.3 or 5 V |
| Package | SOP-16 |
| Watch out for | Needs a 12 MHz crystal (the CH340C doesn't) |
Pinout
1GND
2TXD
3RXD
4V3, 100 nF to GND (or to VCC at 3.3 V)
5and 6UD+ and UD− USB data
7and 8XI and XO, 12 MHz crystal
9to 15Modem lines CTS, DSR, RI, DCD, DTR, RTS
16VCC
How to use it
The DTR or RTS pin through a 100 nF capacitor resets an Arduino for uploads. Install the WCH driver on Windows if it does not appear. Needs a 12 MHz crystal (the CH340C has one inside).
Applications
Custom USB serial boards
Builds that use it
Alternatives
- CP2102 USB to UART ICNo crystal needed, wide driver support
- FT232RL USB to UART ICWell-known FTDI part
Common questions
What is the CH340G USB to serial IC used for?
In maker projects: custom USB serial boards.
How does the CH340G USB to serial IC work?
A USB device that appears as a COM port and converts to UART.
What voltage does the CH340G USB to serial IC need?
3.3 or 5 V.
What can I use instead of the CH340G USB to serial IC?
CP2102 USB to UART IC and FT232RL USB to UART IC.
