Components / Boards / Arduino Uno R3 (CH340 clone)

Arduino Uno R3 (CH340 clone)

Uno-compatible board with a CH340 USB chip. Install the CH340 driver on Windows.

MicrocontrollerATmega328P
Clock16 MHz
Flash32 KB
RAM2 KB
Development BoardsReviewedMPN Uno R3 CH340
UNO
In short

What is the Arduino Uno R3 (CH340 clone) and what is it used for?

Uno-compatible board with a CH340 USB chip. Install the CH340 driver on Windows. Makers use it for low-cost Uno builds.

How it works

The Uno design with a CH340 USB-serial chip in place of the ATmega16U2.

Key specifications

Development board specValue
MicrocontrollerATmega328P
Clock16 MHz
Flash32 KB
RAM2 KB
Logic level5 V
Input voltage7 to 12 V barrel or USB
I/O pins14 digital, 6 analog
ADC10-bit

Pinout

A4 A5I2C (also SDA SCL header)
1112 13SPI
01Serial (shared with USB)
23Interrupts
13LED
VIN7 to 12 V

How to use it

Install the CH340 driver and pick Arduino Uno. Everything else, including shields and libraries, works like the original.

Applications

Builds that use it

Not used in a published project yet.

Alternatives

Buy at

Common questions

What is the Arduino Uno R3 (CH340 clone) used for?

In maker projects: low-cost Uno builds.

How does the Arduino Uno R3 (CH340 clone) work?

The Uno design with a CH340 USB-serial chip in place of the ATmega16U2.

What can I use instead of the Arduino Uno R3 (CH340 clone)?

Arduino Uno R3 and Arduino Uno R4 Minima.