AHT10 temperature and humidity sensor
Older AHT humidity sensor. The AHT20 is the newer version.
MeasuresTemperature and relative humidity
Accuracy±0.3 °C, ±2 % RH
InterfaceI2C
I2C address0x38
SensorsReviewedMPN AHT10Used in 2 projects
In short
What is the AHT10 temperature and humidity sensor and what is it used for?
Older AHT humidity sensor. The AHT20 is the newer version. Makers use it for room monitors.
How it works
The same principle as the AHT20: a capacitive humidity element with on-chip calibration.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature and relative humidity |
| Accuracy | ±0.3 °C, ±2 % RH |
| Interface | I2C |
| I2C address | 0x38 |
| Supply voltage | 1.8 to 3.6 V |
Pinout
VIN1.8 to 3.6 V (modules with a regulator accept 5 V)
GNDGround
SCLI2C clock
SDAI2C data
How to use it
Use the Adafruit AHTX0 library at address 0x38. The AHT10 cannot share an I2C bus reliably with some other devices; if the bus misbehaves, switch to an AHT20.
Applications
Room monitors
Builds that use it
Alternatives
- AHT20 temperature and humidity sensorFixes the AHT10's I2C bus issues
Common questions
What is the AHT10 temperature and humidity sensor used for?
In maker projects: room monitors.
How does the AHT10 temperature and humidity sensor work?
The same principle as the AHT20: a capacitive humidity element with on-chip calibration.
What voltage does the AHT10 temperature and humidity sensor need?
1.8 to 3.6 V.
How do I connect the AHT10 temperature and humidity sensor to an Arduino or ESP32?
I2C. Pins: VIN (1.8 to 3.6 V (modules with a regulator accept 5 V)), GND (Ground), SCL (I2C clock), SDA (I2C data).
What can I use instead of the AHT10 temperature and humidity sensor?
AHT20 temperature and humidity sensor.
