2.13 inch e-paper HAT for Raspberry Pi
Small e-ink display that plugs on a Pi Zero.
TypeE-paper
Size2.13 inch
Resolution250 × 122
InterfaceSPI on the 40-pin header
DisplaysReviewedMPN 2.13inch e-Paper HATUsed in 3 projects
In short
What is the 2.13 inch e-paper HAT for Raspberry Pi and what is it used for?
Small e-ink display that plugs on a Pi Zero. Makers use it for pi Zero status displays.
How it works
A 250 × 122 e-paper panel on a HAT for the Pi header.
Key specifications
| Display spec | Value |
|---|---|
| Type | E-paper |
| Size | 2.13 inch |
| Resolution | 250 × 122 |
| Interface | SPI on the 40-pin header |
| Supply voltage | 3.3 V |
Pinout
40-pin headerUses SPI0 plus GPIO for DC, RST and BUSY
How to use it
Enable SPI in raspi-config and use Waveshare's Python library for your panel version. Good for status displays that change every few minutes.
Applications
Pi Zero status displays
Builds that use it
Alternatives
- 2.9 inch e-paper displayBare panel for microcontrollers
Common questions
What is the 2.13 inch e-paper HAT for Raspberry Pi used for?
In maker projects: pi Zero status displays.
How does the 2.13 inch e-paper HAT for Raspberry Pi work?
A 250 × 122 e-paper panel on a HAT for the Pi header.
What voltage does the 2.13 inch e-paper HAT for Raspberry Pi need?
3.3 V.
How do I connect the 2.13 inch e-paper HAT for Raspberry Pi to an Arduino or ESP32?
SPI on the 40-pin header. Pins: 40-pin header (Uses SPI0 plus GPIO for DC, RST and BUSY).
What can I use instead of the 2.13 inch e-paper HAT for Raspberry Pi?
2.9 inch e-paper display.
