16x2 LCD blue backlight (parallel)
The plain 16 × 2 LCD without the I2C board. Uses six data pins.
What is the 16x2 LCD blue backlight (parallel) and what is it used for?
The plain 16 × 2 LCD without the I2C board. Uses six data pins. Makers use it for learning the LCD parallel bus.
An HD44780 controller with built-in character fonts drives the 16 × 2 LCD.
Key specifications
| Display spec | Value |
|---|---|
| Type | Character LCD |
| Size | 16 × 2 |
| Driver IC | HD44780 |
| Interface | 4- or 8-bit parallel |
| Supply voltage | 5 V |
Pinout
How to use it
Wire RS to 12, E to 11 and D4 to D7 to pins 5, 4, 3 and 2, then use LiquidCrystal lcd(12, 11, 5, 4, 3, 2). Put a 10 kΩ pot on V0 for contrast. Add a PCF8574 backpack to cut the wiring to two pins.
Applications
Builds that use it
Alternatives
- 16x2 LCD with I2C backpack (PCF8574)Same with I2C
- I2C LCD adapter (PCF8574 backpack)Backpack to add
Common questions
What is the 16x2 LCD blue backlight (parallel) used for?
In maker projects: learning the LCD parallel bus.
How does the 16x2 LCD blue backlight (parallel) work?
An HD44780 controller with built-in character fonts drives the 16 × 2 LCD.
What voltage does the 16x2 LCD blue backlight (parallel) need?
5 V.
How do I connect the 16x2 LCD blue backlight (parallel) to an Arduino or ESP32?
4- or 8-bit parallel. Pins: 1 (VSS (GND)), 2 (VDD (5 V)), 3 (V0 (contrast pot wiper)), 4 (RS), 5 (RW (tie to GND)), 6 (E).
What can I use instead of the 16x2 LCD blue backlight (parallel)?
16x2 LCD with I2C backpack (PCF8574) and I2C LCD adapter (PCF8574 backpack).
