I2C LCD adapter (PCF8574 backpack)
Board that turns a 16 × 2 or 20 × 4 LCD into an I2C device.
FunctionI2C to HD44780 parallel
Supply voltage5 V
InterfaceI2C (0x27 or 0x3F)
Logic level5 V
InterfacesReviewedMPN PCF8574 backpackUsed in 1 project
In short
What is the I2C LCD adapter (PCF8574 backpack) and what is it used for?
Board that turns a 16 × 2 or 20 × 4 LCD into an I2C device. Makers use it for saving pins on LCDs.
How it works
A PCF8574 8-bit I/O expander drives the LCD's 4-bit bus and backlight.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | I2C to HD44780 parallel |
| Supply voltage | 5 V |
| Interface | I2C (0x27 or 0x3F) |
| Logic level | 5 V |
Pinout
16pinsSolder to the LCD
GND VCC SDA SCLI2C
A0 A1 A2Address pads
JumperBacklight
TrimmerContrast
How to use it
Solder it to a 16x2 or 20x4 LCD, use LiquidCrystal_I2C and find the address (0x27 or 0x3F) with an I2C scanner.
Applications
Saving pins on LCDs
Builds that use it
Alternatives
- 16x2 LCD with I2C backpack (PCF8574)LCD with backpack fitted
Common questions
What is the I2C LCD adapter (PCF8574 backpack) used for?
In maker projects: saving pins on LCDs.
How does the I2C LCD adapter (PCF8574 backpack) work?
A PCF8574 8-bit I/O expander drives the LCD's 4-bit bus and backlight.
What voltage does the I2C LCD adapter (PCF8574 backpack) need?
5 V.
How do I connect the I2C LCD adapter (PCF8574 backpack) to an Arduino or ESP32?
I2C (0x27 or 0x3F). Pins: 16 pins (Solder to the LCD), GND VCC SDA SCL (I2C), A0 A1 A2 (Address pads), Jumper (Backlight), Trimmer (Contrast).
What can I use instead of the I2C LCD adapter (PCF8574 backpack)?
16x2 LCD with I2C backpack (PCF8574).
