Digital trainer
A virtual 74xx IC trainer kit for your digital lab. Wire it, flip switches, watch the LEDs.
IC sockets
Add a wire
Wires on the board (5)
Readings table
Set the switches, then add a row: every wired switch and LED is recorded for your lab record.
Pinouts of the ICs on your board
U1 · 7400 Quad 2-input NAND
- 1 1A
- 2 1B
- 3 1Y
- 4 2A
- 5 2B
- 6 2Y
- 7 GND
- 8 3Y
- 9 3A
- 10 3B
- 11 4Y
- 12 4A
- 13 4B
- 14 VCC
Common questions
Is this a replacement for the digital trainer kit in my lab?
It is a way to practise. You wire real chip pinouts on a virtual trainer, so you arrive at the lab knowing the connections, but your college practical is still done on the kit your lab provides.
Which ICs are included?
7400, 7402, 7404, 7408, 7432, 7486, 7447, 7473, 7474, 7476, 7483, 7485, 7490, 7493, 74138, 74151, 74153 and 74194.
What mistakes does it catch?
A chip with no power, an open input (which reads HIGH on TTL), two outputs joined together and a short between +5 V and GND are all reported, as they would show up on a real kit.
Does it model gate delays?
No. Gates respond instantly, and flip-flops change on their clock edge. It teaches the logic, not timing.
