Tools / Capacitor Stored Energy

How to work out the energy stored in a capacitor

A charged capacitor holds energy in its electric field. Energy grows with the square of voltage, so voltage matters most.

E = ½CV²; Q = CV

Inputs

µF
V

Results update as you type. Prefixes work: 4.7k, 100u, 10n.

Result
Energy
1.25 mJ
Charge
500 µC
What this leaves out
  • Charged capacitors can remain hazardous after supply disconnection. High voltage/energy requires qualified review.
Step by step

The working with your numbers

  1. Change microfarads to faradsC = 100 µF ÷ 1,000,000 = 10⁻⁴ F
  2. Square the voltageV² = 5² = 25
  3. EnergyE = ½ × C × V² = 0.5 × 10⁻⁴ × 25 = 1.25 mJ
  4. ChargeQ = C × V = 10⁻⁴ × 5 = 500 µC
See it

Energy grows with the voltage squared

0 J2 mJ4 mJ0 V5 V10 VVoltage1.25 mJ
Energy against voltage. Twice the voltage stores four times the energy.

Does the answer make sense?

  • OK: Double the voltage to 10 V and the energy goes up four times, to 5 mJ.
  • OK: 1.25 mJ is small, but always discharge capacitors above about 50 V before handling.
  • OK: Pick a capacitor rated well above the working voltage, about 1.5 to 2 times, so it lasts.

Common mistakes

  • Forgetting to change µF to farads, which makes the energy a million times too big.
  • Forgetting the ½ in E = ½CV².
  • Expecting to use all the stored energy. A circuit that stops working below half the voltage only gets three quarters of it.

Learn it, try it, build it

Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.

Just need the number? Use the capacitor stored energy calculator on Geekobot.

Common questions

How much energy is in a capacitor?

E = ½ × C × V². A 100 µF capacitor at 5 V stores 0.5 × 0.0001 × 25 = 1.25 mJ.

Why does voltage matter more than capacitance for stored energy?

Energy grows with the voltage squared but only in proportion to capacitance. Doubling the voltage stores four times the energy; doubling the capacitance stores twice as much.