E-waste builds / Old phone charger

Old phone charger → 5 V supply for your breadboard

From: A working USB phone charger

Low risk20 min

Steps

Stay safe

  • Mains voltage is inside the charger. Never open it or use one with a cracked case.
  • A 5 V charger is fine for Uno and ESP32 projects. Do not use it to run motors that stall: the voltage drops and the board resets.

Build with it

Also good for: Power a finished project without a laptop; Replace a breadboard power module.

Common questions

What do you get from a working USB phone charger?

5 V USB power supply (whole charger), USB cable you can cut.

Is it safe?

Risk: Low. Mains voltage is inside the charger. Never open it or use one with a cracked case. A 5 V charger is fine for Uno and ESP32 projects. Do not use it to run motors that stall: the voltage drops and the board resets.