Projects / Ideas / Colour name reader

Colour name reader

IntermediateSensorsIdeaReviewed
In short

How do you build a colour name reader?

A colour sensor with its own white LED names the colour of paper cards, and shows red, green and blue values. You need Arduino Nano, TCS34725 colour sensor, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Name a colour.

How to build it

  1. Wire the sensor
  2. Read raw values
  3. Calibrate on white paper
  4. Match against a small table
  5. Show the name

Related projects

Common questions

What parts do I need for the colour name reader?

Arduino Nano, TCS34725 colour sensor, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.

How long does the colour name reader take to build?

About 180 minutes for a intermediate maker.