Idea
In short
How do you build a sip-and-puff switch?
A pressure sensor on a tube lets someone who cannot use their hands send clicks to a computer by sipping or puffing. You need Arduino Leonardo, Barometric pressure sensor BMP180 and USB A to micro-USB cable (data).
- Level
- Advanced
- Time
- About 240 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn air pressure into computer input.
Parts list
- Development Boards
- SensorsUse a gauge pressure sensor if you can
- Cables & Wires
How to build it
- Connect a clean tube to a sealed sensor chamber
- Find the resting pressure
- Detect sips and puffs
- Send left and right clicks as a USB mouse
- Use a replaceable mouthpiece
Related projects
Common questions
What parts do I need for the sip-and-puff switch?
Arduino Leonardo, Barometric pressure sensor BMP180 and USB A to micro-USB cable (data). Barometric pressure sensor BMP180: Use a gauge pressure sensor if you can.
How long does the sip-and-puff switch take to build?
About 240 minutes for a advanced maker.
