Idea
In short
How do you build a pico W garage distance page?
A Pico W measures the distance to the car with an HC-SR04 and shows it on a local page with a stop line, so you can check how far in the car is. Divide the 5 V echo signal down to 3.3 V, and do not rely on it as a safety device. You need Raspberry Pi Pico W, HC-SR04 Ultrasonic Sensor, Resistor 1 kΩ × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Check from a phone how far in the car is parked.
Parts list
- Development Boards
- Sensors
- PassivesResistor 1 kΩ × 3
- Prototyping
How to build it
- Wire the sensor with a divider on the echo pin
- Measure the distance
- Set the stop distance
- Join Wi-Fi with placeholder credentials
- Serve a page with a coloured status
Common questions
What parts do I need for the pico W garage distance page?
Raspberry Pi Pico W, HC-SR04 Ultrasonic Sensor, Resistor 1 kΩ × 3 and Breadboard 830 Tie Points.
How long does the pico W garage distance page take to build?
About 150 minutes for a intermediate maker.
