Idea
In short
How do you build a pico tilt bar display?
A Pico reads an MPU6050 and draws a horizontal bar on an OLED that moves left and right as you tilt the board. Works only when held still. You need Raspberry Pi Pico H, MPU6050 IMU, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show tilt as a moving bar.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wake the MPU6050 over I2C
- Read the accelerometer registers
- Compute the tilt angle
- Smooth the value
- Draw a bar from the centre
Common questions
What parts do I need for the pico tilt bar display?
Raspberry Pi Pico H, MPU6050 IMU, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pico tilt bar display take to build?
About 140 minutes for a intermediate maker.
