Idea
In short
How do you build a pi Zero USB gadget mode?
Set up a Pi Zero to appear as a network device over USB so you can log in without a monitor, with a good password and keys. You need Raspberry Pi Zero W, Micro-USB to USB-C OTG adapter, SanDisk microSD card 32 GB (A1, Class 10) and USB A to micro-USB cable (data).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log in to a Pi over USB.
Parts list
- Single Board Computers
- Cables & Wires
- SBC Accessories
- Cables & Wires
How to build it
- Flash the card
- Enable gadget mode in the boot files
- Connect the data port
- Find it on the network
- Log in with a key
Related projects
Common questions
What parts do I need for the pi Zero USB gadget mode?
Raspberry Pi Zero W, Micro-USB to USB-C OTG adapter, SanDisk microSD card 32 GB (A1, Class 10) and USB A to micro-USB cable (data).
How long does the pi Zero USB gadget mode take to build?
About 150 minutes for a intermediate maker.
