Idea
In short
How do you build a home network ad blocker?
A Raspberry Pi Zero 2 W runs a DNS filter on your own home network that blocks adverts and trackers for every device that uses it, with a small web page of statistics. Use it only on a network you own and tell the people who share it. You need Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 27 W USB-C power supply.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Block adverts for the whole house from a tiny computer.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
How to build it
- Write the system card and set a fixed address
- Install the DNS filter
- Point the router at the Pi
- Open the statistics page
- Add a block list and test
Related projects
Common questions
What parts do I need for the home network ad blocker?
Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10) and Raspberry Pi 27 W USB-C power supply.
How long does the home network ad blocker take to build?
About 150 minutes for a intermediate maker.
