Projects / Ideas / Nucleo chip temperature and supply logger

Nucleo chip temperature and supply logger

IntermediateSensorsIdeaReviewed
In short

How do you build a nucleo chip temperature and supply logger?

A Nucleo board reads its own internal temperature sensor and reference voltage with the ADC and prints both over serial. The chip reading is indicative only and tracks the chip, not the room. You need STM32 Nucleo-64 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use the ADC channels that are built into the chip.

Parts list

How to build it

  1. Enable the internal temperature and reference channels
  2. Read each channel with averaging
  3. Convert using the factory calibration values
  4. Print a line every second
  5. Watch the value rise when you warm the chip with your finger

Related projects

Common questions

What parts do I need for the nucleo chip temperature and supply logger?

STM32 Nucleo-64 and Breadboard 830 Tie Points.

How long does the nucleo chip temperature and supply logger take to build?

About 150 minutes for a intermediate maker.