Idea
In short
How do you build a classroom CO2 display?
A CO2 sensor shows ppm and a colour so teachers can see when to open windows. You need Arduino Nano, MH-Z19B CO2 sensor, WS2812B ring 16 LEDs, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Display CO2 for a room.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Displays
- Prototyping
How to build it
- Read the sensor on serial
- Warm up for three minutes
- Show ppm
- Colour the ring by level
- Calibrate outdoors
Common questions
What parts do I need for the classroom CO2 display?
Arduino Nano, MH-Z19B CO2 sensor, WS2812B ring 16 LEDs, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the classroom CO2 display take to build?
About 240 minutes for a intermediate maker.
