Idea
In short
How do you build a mega 2560 keypad code demo?
An Arduino Mega 2560 reads a 4 by 4 keypad and shows typed digits on a 16 by 2 LCD, checking a stored code and showing correct or wrong. A learning demo, not a security lock. You need Arduino Mega 2560 (CH340 clone), 4x4 matrix keypad (membrane), 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 110 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Practise keypad scanning and a code check.
Parts list
- Development Boards
- Switches
- Displays
- Prototyping
How to build it
- Wire the keypad rows and columns
- Wire the LCD on I2C
- Scan the keypad
- Collect four digits
- Compare with the stored code
Common questions
What parts do I need for the mega 2560 keypad code demo?
Arduino Mega 2560 (CH340 clone), 4x4 matrix keypad (membrane), 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.
How long does the mega 2560 keypad code demo take to build?
About 110 minutes for a beginner maker.
