Idea
In short
How do you build a digital readout for a lathe?
Read cheap digital calipers mounted on a lathe or drill and show positions on a large display. You need Arduino Nano, Digital vernier caliper × 2, 20x4 LCD with I2C backpack, Resistor 10 kΩ × 4 and BC547 NPN transistor × 4.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Decode the caliper data protocol.
Parts list
- Development Boards
- Tools & Instruments
- Displays
- PassivesResistor 10 kΩ × 4
- Semiconductors
How to build it
- Tap the caliper's data and clock lines
- Level shift from 1.5 V
- Decode the bits
- Show X and Z
- Add zero buttons
Common questions
What parts do I need for the digital readout for a lathe?
Arduino Nano, Digital vernier caliper × 2, 20x4 LCD with I2C backpack, Resistor 10 kΩ × 4 and BC547 NPN transistor × 4.
How long does the digital readout for a lathe take to build?
About 300 minutes for a advanced maker.
