Projects / Ideas / Remote-controlled fan speed

Remote-controlled fan speed

IntermediateSmart HomeIdeaReviewed
In short

How do you build a remote-controlled fan speed?

An old TV remote sets the speed of a small 5 V fan in three steps. You need Arduino Nano, IR receiver VS1838B, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a remote to change PWM.

Parts list

How to build it

  1. Learn the remote codes
  2. Map three buttons
  3. Set PWM steps
  4. Drive the fan through a MOSFET
  5. Show the step on an LED

Related projects

Common questions

What parts do I need for the remote-controlled fan speed?

Arduino Nano, IR receiver VS1838B, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007 and Breadboard 830 Tie Points.

How long does the remote-controlled fan speed take to build?

About 180 minutes for a intermediate maker.