Idea
In short
How do you build a sixteen knobs on one pin?
A 16-channel multiplexer lets one analogue pin read eight knobs in turn and prints them as a table. You need Arduino Nano, CD74HC4067 16-channel mux module, Potentiometer 10 kΩ × 8 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many inputs with one pin.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Prototyping
How to build it
- Wire the select pins
- Wire the knobs
- Step through channels
- Print all values
- Detect which knob moved
Common questions
What parts do I need for the sixteen knobs on one pin?
Arduino Nano, CD74HC4067 16-channel mux module, Potentiometer 10 kΩ × 8 and Breadboard 830 Tie Points.
How long does the sixteen knobs on one pin take to build?
About 180 minutes for a intermediate maker.
