Multiplexer (4:1 and 8:1) and realising a function with it
To verify the operation of a 4:1 multiplexer and use an 8:1 multiplexer to realise a Boolean function.
Theory
A multiplexer routes one of 2ⁿ data inputs to its output, chosen by n select lines. Any function of n + 1 variables can be built on a 2ⁿ:1 multiplexer by using n variables on the selects and feeding each data input with 0, 1, the last variable or its complement.
Apparatus
- ICs 74153 (dual 4:1) and 74151 (8:1)
- Digital trainer kit
Circuit connections
- 74153: select lines S1 S0 to switches, I0–I3 to switches, enable (G) low, output to an LED
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| S1 | S0 | Selected | Y |
|---|---|---|---|
| 0 | 0 | I0 | 0 |
| 0 | 1 | I1 | 1 |
| 1 | 0 | I2 | 1 |
| 1 | 1 | I3 | 0 |
Precautions
- Hold the enable pin low (active-low).
- Do not leave select lines floating.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | S1 | S0 | Selected | Y |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the multiplexer (4:1 and 8:1) and realising a function with it experiment?
To verify the operation of a 4:1 multiplexer and use an 8:1 multiplexer to realise a Boolean function.
What apparatus is needed for multiplexer (4:1 and 8:1) and realising a function with it?
ICs 74153 (dual 4:1) and 74151 (8:1), Digital trainer kit.
What is the theory behind multiplexer (4:1 and 8:1) and realising a function with it?
A multiplexer routes one of 2ⁿ data inputs to its output, chosen by n select lines. Any function of n + 1 variables can be built on a 2ⁿ:1 multiplexer by using n variables on the selects and feeding each data input with 0, 1, the last variable or its complement.
What result should I get in multiplexer (4:1 and 8:1) and realising a function with it?
The output follows the data input chosen by the select lines. The function was realised on an 8:1 multiplexer and verified.
What precautions should I take in multiplexer (4:1 and 8:1) and realising a function with it?
Hold the enable pin low (active-low). Do not leave select lines floating.
