Lab / Digital electronics

Flip-flops: SR, JK, D and T

To verify the truth tables of SR, JK, D and T flip-flops, including a JK master-slave flip-flop built from NAND gates.

Digital electronicsVirtual readings4 viva questions
ABY

Theory

A flip-flop stores one bit and changes only on a clock edge. JK: J = K = 0 holds, J = 1 K = 0 sets, J = 0 K = 1 resets, J = K = 1 toggles. D: Q follows D on the clock edge. T: toggles when T = 1. The master-slave arrangement stops the JK from toggling many times (race-around) while the clock is high.

Apparatus

  • ICs 7400, 7476 (JK), 7474 (D)
  • Digital trainer kit with clock pulse

Circuit connections

  • JK: J, K from switches; clock from the trainer's pulse; Q and Q′ to LEDs; preset and clear high

Procedure

Pre-lab check

4 questions · 75% to be ready
1Difference between a latch and a flip-flop?
2What is the race-around condition?
3How do you make a D flip-flop from a JK?
4Where are D flip-flops used?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
JKQ(n+1)Action
00Q(n)Hold
010Reset
101Set
11Q′(n)Toggle

Precautions

  • Debounce manual clock switches, or use the trainer's pulser.
  • Keep preset and clear inactive (high) during normal operation.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.JKQ(n+1)Action
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book

Your lab record

Result formatThe truth tables of the SR, JK, D and T flip-flops are verified.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva practice

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. Difference between a latch and a flip-flop?
2. What is the race-around condition?
3. How do you make a D flip-flop from a JK?
4. Where are D flip-flops used?

Quick answers for your record and viva

What is the aim of the flip-flops: sr, jk, d and t experiment?

To verify the truth tables of SR, JK, D and T flip-flops, including a JK master-slave flip-flop built from NAND gates.

What apparatus is needed for flip-flops: sr, jk, d and t?

ICs 7400, 7476 (JK), 7474 (D), Digital trainer kit with clock pulse.

What is the theory behind flip-flops: sr, jk, d and t?

A flip-flop stores one bit and changes only on a clock edge. JK: J = K = 0 holds, J = 1 K = 0 sets, J = 0 K = 1 resets, J = K = 1 toggles. D: Q follows D on the clock edge. T: toggles when T = 1. The master-slave arrangement stops the JK from toggling many times (race-around) while the clock is high.

What result should I get in flip-flops: sr, jk, d and t?

The truth tables of the SR, JK, D and T flip-flops are verified.

What precautions should I take in flip-flops: sr, jk, d and t?

Debounce manual clock switches, or use the trainer's pulser. Keep preset and clear inactive (high) during normal operation.

Flip-flops: SR, JK, D and T: lab experiment, theory and viva