Fault finder: Two-way staircase switch
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Lamp always off: what should I check?
Check the chip is powered on pins 14 and 7.
Lamp flickers: what should I check?
An input is floating, check the switch outer terminals.
Lamp dim: what should I check?
1 kilohm is right, check the LED direction.
Chip warm: what should I check?
Check the supply polarity at the USB breakout.
Works with only one switch: what should I check?
The second switch common is not on pin 2.
