Fault finder: One-bit adder from gates

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

LEDs never light: what should I check?

Check pins 14 and 7 on both chips and the LED direction.

Wrong results: what should I check?

Check the chips, the XOR is 74HC86 and the AND is 74HC08.

Flickering LEDs: what should I check?

A floating input, tie unused pins to GND.

Buttons do nothing: what should I check?

Check the pull-down resistors and the 5V on the button.

Both LEDs always lit: what should I check?

An input is stuck high, check the pull-downs.