Fault finder: Pixel-art frame
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing lights: what should I check?
Check you are on DIN, not DOUT, and the 5V and GND.
Picture scrambled: what should I check?
Toggle SERPENTINE.
Wrong colours: what should I check?
Change NEO_GRB to NEO_RGB.
First pixel flickers: what should I check?
Check the 330 ohm resistor and capacitor.
Nano resets when bright: what should I check?
Lower BRIGHT or use a separate 5V supply.
