Fault finder: Wireless doorbell with your own tunes
11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No sound: what should I check?
Check the SD card files and the DFPlayer wiring.
Short range: what should I check?
Add antenna wires and fresh batteries.
Rings twice: what should I check?
Lengthen the repeat gap.
