Fault finder: Wi-Fi status display

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Never connects: what should I check?

5 GHz-only network, or a typo in the password.

Connects then drops: what should I check?

Weak signal or a poor USB cable: try another power source.

Display blank: what should I check?

Check the I2C address with a scanner.