Fault finder: Wi-Fi setup page for your device
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Setup page does not appear: what should I check?
Open any address such as 192.168.4.1.
Network not in the list: what should I check?
Move closer and refresh; only 2.4 GHz networks show.
Keeps restarting: what should I check?
Check the saved details and the supply.
Cannot clear settings: what should I check?
Hold the button before and during power-up.
