Fault finder: ESP-NOW remote control
9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Relay never clicks: what should I check?
Check both are in station mode and that ESP-NOW starts without error.
Compile error on the callback: what should I check?
Use core 3.x, or change the callback arguments for 2.x.
Relay is inverted: what should I check?
Swap the HIGH and LOW writes.
Short range: what should I check?
Move away from metal and keep the antenna side clear.
