Fault finder: Web Bluetooth dashboard
9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No device chooser: what should I check?
Use Chrome or Edge and an https or localhost address.
Device not listed: what should I check?
Check it is advertising and the name filter matches.
Values look scrambled: what should I check?
Read int16 values in little-endian order.
Disconnects often: what should I check?
Move closer and slow the rate.
