Fault finder: Mini weather station

12 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Temperature reads high in the sun: what should I check?

Needs a shaded, ventilated cover (a stack of plant saucers works).

Forecast never appears: what should I check?

History resets if power is lost: RTC memory survives sleep, not power cuts.

Battery lasts days, not weeks: what should I check?

DevKit USB chip and LED draw power; use a bare module for long runs.