Fault finder: Weather clock
13 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 13 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 13
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Time is wrong by hours: what should I check?
Change the offset in configTime for your zone.
Forecast never arrives: what should I check?
Check the coordinates and the Wi-Fi password.
JSON errors: what should I check?
Install ArduinoJson version 7 or change the code for version 6.
Display stays blank: what should I check?
Check address 0x3C with an I2C scanner.
