Fault finder: Sleep mask with wake light
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Time wrong: what should I check?
Replace the RTC coin cell and reset the time.
Motor too strong: what should I check?
Lower the analogWrite value.
LEDs flicker: what should I check?
Check the data pin and the ground.
Battery warm: what should I check?
Stop and check for a short.
