Projects / Compass bracelet / Fault finder

Fault finder: Compass bracelet

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

All zeros: what should I check?

The module may be a different chip; check the library.

North is wrong: what should I check?

Check the orientation and the calibration turn.

LED jumps: what should I check?

Keep metal and cables away from the module.

No LEDs: what should I check?

Check the data line and the 5 V supply.