Fault finder: Battery voltage checker

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Reads zero: what should I check?

Check the S wire on A0 and the ground link.

Reading half the real voltage: what should I check?

Your module divides differently, check the factor.

Reading jumps: what should I check?

Poor connection at the screw terminals.

Percentage looks wrong: what should I check?

Choose the right battery type with the button.

Nano resets: what should I check?

A battery of more than 25 V or reversed polarity, disconnect it at once.