Fault finder: Voice-controlled robot car

7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing arrives: what should I check?

Check the HC-05 wiring and the baud rate.

Wrong direction: what should I check?

Swap the motor wires on that side.

Misses words: what should I check?

Speak clearly in a quiet room.