Fault finder: Gate visitor logbook with keypad

8 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

SD does not start: what should I check?

Format FAT32 and check the CS pin and the level shifter.

Time wrong: what should I check?

Set the RTC and replace the coin cell.

No flat accepted: what should I check?

Check FLATS.TXT has one number per line with no spaces.

LCD blank: what should I check?

Check the I2C address 0x27 or 0x3F.