Projects / Door knock detector / Fault finder

Fault finder: Door knock detector

6 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always firing: what should I check?

Check the 10 k resistor and the rest level.

Never fires: what should I check?

Press the module firmly on the door.

Counts too many: what should I check?

Raise the 120 ms ignore time.